A masana'antar kera gilashi, ɗaya daga cikin lahani da aka fi gani yayin samarwa shine kasancewarkumfa a cikin gilashin kwalaben giyaDuk da cewa kwalaben gilashi sun kasance ɗaya daga cikin ingantattun hanyoyin marufi don abubuwan sha da barasa saboda aminci, dorewa, da kuma kyawunsu, lahani kamar kumfa na iya shafar ingancin samfur da gamsuwar abokin ciniki.
Wannan labarin yana bincikamanyan dalilan samuwar kumfa a cikin kwalaben gilashikuma yana ba da haske game da yadda za a rage su ta hanyar ingantaccen tsarin sarrafawa da kuma kula da inganci.
1. Ciyar da Gilashin Gilashi mara kyau a cikin Mold
Idan gilashin da aka narke ya kasa shiga cikin mold ɗin da babu komai a ciki, to akwai gogayya mai yawa da bangon mold ɗin. Wannan yana haifar da gogayya mai yawa.wrinklesa saman kwalbar. A lokacin busawa, waɗannan wrinkles suna faɗaɗa kuma daga ƙarshe suna bayyana a bayyane.lahani a jikin kwalbar.
2. Manyan Alamun Ragewa daga Mai Ciyarwa
Idan ruwan wukake na mai ciyarwa ya tafitabo mai yawaa kan gilashin gob, waɗannan alamun za su bayyana a matsayin lahani a kan kwalbar da aka gama bayan an samar da ita.
3. Ingancin Kayan Moda mara kyau
Kayan mold masu ƙarancin yawa ko ƙarancin ƙarfi suna iya yin oxidize cikin sauri a yanayin zafi mai yawa, suna ƙirƙirar ƙananan ramuka a saman mold. Wannan yana haifar dasaman da ba shi da ƙarfi ko mara daidaitoakan kwalaben gilashin da aka gama.
4. Man Mold Mai Ƙarfin Inganci
Idan man shafawa na mold bai da inganci, man shafawa ba zai isa ba. Wannan yana rage kwararar gob kuma yana canza siffarsa da sauri, wanda ke haifar da lahani a cikin kwalba.
5. Tsarin Motsa Jiki Mara Kyau
Idan ramin mold ɗin da babu komai ya yi girma ko ƙanƙanta, gilashin gogon ba zai iya yaɗuwa daidai lokacin busawa ba. Wannan yana haifar da hakan.rarrabawa mara daidaito, wanda ke haifar da tabo ko alamun baƙi a jikin kwalbar.
6. Isar da Gob mara daidaito da kuma rashin kyawun daidaitawar iska
Idan saurin isar da gob bai daidaita ba ko kuma iskar iskar busar ba ta daidaita sosai ba, zafin da ke tsakanin molds mara komai da busarwa zai zama mara daidaituwa. Wannan yana haifar da rashin daidaituwa.wuraren sanyia saman kwalbar, wanda ke shafar santsi da tsabtarsa kai tsaye.
7. Najasa ko Zafin Jiki Mara Daidaito a Cikin Tanderu
Idan gilashin da aka narke ya ƙunshi ƙazanta ko kuma zafin wutar ba a daidaita shi daidai ba, kwalaben ƙarshe na iya bayyanakumfa, ƙananan barbashi, ko duwatsu, rage ingancin samfurin gaba ɗaya.
8. Saurin Inji mara Kyau
Idan an saita saurin injin ɗin da ya yi girma sosai ko ƙasa da haka, jikin kwalbar na iya zama mara daidaituwa, tare daKauri mara daidaituwa na bango, wanda kuma ke ba da gudummawa ga alamun ko kumfa da ake gani.
Kammalawa
Kumfa da lahani a cikin kwalaben gilashi galibi suna faruwa ne sakamakonrashin daidaito a tsarin aiki, matsalolin kayan aiki, ko ingancin kayan aikiTa hanyar inganta ingancin mold, amfani da man shafawa mai inganci, inganta isar da gob, da kuma kiyaye daidaiton wutar lantarki, masana'antun za su iya rage yawan kumfa sosai.
AKamfanin QLT Glass Products Manufacturing Co., Ltd., mun ɗaukatsauraran matakan sarrafawa, fasahar haɓaka annealing, da kuma gyara mold daidai gwargwadodomin tabbatar da cewa kowace kwalba ta cika mafi girman ƙa'idodi na tsabta, aminci, da ƙarfi. Wannan shine dalilin da ya sa manyan kamfanonin giya da barasa a duk duniya suka amince da mu a matsayin abokin haɗin gwiwarsu na dogon lokaci na marufi da gilashi.
Lokacin Saƙo: Yuli-31-2025